Neuroshell 2 Crack Rocks
Blowouts and Alkaline Burns may occur. Make sure to read Important safety precautions and first aid at the bottom of this page. STEP 1: Drilling Use 1-1/2 inches (or 3.8 cm) drill bit, holes should be drilled 1 foot (or 30 cm) apart.
Crack rock, crack rock, crack rock, crack rock [Verse 2] You're shuckin' and jivin'. Ocean speaks about a man overcome by an addiction to crack cocaine. To $3,495 for NeuroShell DayTrader Power User. Numerous plugins are available starting at $299 each. NeuroShell trader 6.
80 to 90% of the depth, do not go through. Note: Using smaller drill bit will reduce expanding strength. Please call for applications with depths less than 6 inches. Tip 1: To insure success, Dexpan® needs Free Space to expand to. Make sure that the rock or concrete has an open face for expansion equal to the drilling depth. If there is no expansive space, extra holes may be required to establish it.
Tip 2: Dexpan® cracks according to drilling patterns designed for controlled demolition and Easy Clean up. Call for our Free drilling patterns to minimize consumption of Dexpan® by cutting rocks or concrete into desired sizes. If you encounter rebar while drilling, move drill bit a few inches to avoid drill bit damage.
STEP 2: Mixing Choose correct type of Dexpan® based on ambient and core temperature. Core temperature is the temperature inside of the rock or concrete, which can be different from the ambient temperature. In a bucket, combine 0.4 gallons (or Three 500mL bottle) of cold water with one 11 Lb.
(or 5 Kg.) bag of Dexpan®. Mix well to a slurry, no lumps. A drill and paddle is recommended. STEP 3: Pouring Dexpan® slurry should be poured into holes within 10-15 minutes after mixing. DO NOT leave excess Dexpan® slurry in the bucket as blow-outs may occur. Dispose of waste according to federal, state, and/or local regulations. Coverage: Normally one 11 Lb.
(or 5 Kg.) bag of Dexpan® can fill up to 9 lineal feet (or 2.5 meters) of 1.5 in (or 3.8 cm) diameter holes. Tip 3: Clean holes after drilling using an air hose or vacuum to remove excess dust, this is not a requirement, but is recommended for best results. Tip 4: Be sure to protect the filled holes from direct sun light, rain and snow. If water might get into holes, then Dexpan® slurry should be poured into plastic tubing. Tip 5: For horizontal holes, you may mix Dexpan® thicker and push it into horizontal holes.
Dexpan® Cracking or Breaking Time: Properly drilled and mixed, the cracks may appear after 2 to 8 hours of filling, depending on ambient and core temperature, humidity, rock or concrete hardness. Note: Although the Dexpan® slurry may look dry on top, it does not mean it has stopped working, please allow the full 24 hours before calling our technical department. Do not remove Dexpan from the holes or try other methods, these could void your warranty. If Dexpan® completely dries into a powder and did not crack, pour additional water onto Dexpan® filled holes to restart the process. As you can see after 6 hours, hairline cracks appear in this concrete foundation filled with rebars. 2 hours after, cracks are getting wider and deeper.
24 Hours after pouring, Dexpan® cracks are well developed and the concrete is ready to be disposed of. Cut off exposed rebars, even they could not stop Dexpan from Breaking this concrete foundation. Should you have any questions, please do not hesitate to contact our technical support at 575-528-5454 Mike (Left) and Luis (right) Dexpan® Non-Explosive controlled demolition agent, the easy to use, cost effective way to work safer!.WARNING. Improper use may cause serious injury.
Read instructions carefully. Forceful Blowouts may occur once mixed with water!
Keep a safe distance. DO NOT look directly into filled holes. Use of Dexpan® in hot weather could increase chances of blowouts. DO NOT pour into hot holes.
Use iced water in summer. Alkaline Burns may occur. Do Not Breathe in Dust. Avoid Eye and Skin Contact. Rinse it off IMMEDIATELY and thoroughly with plenty of water for at least 20 minutes. Open eye lids, remove all debris.
Data
Rinse until pH back to normal reading 7, and consult doctor. Refer to SDS (Safety Data Sheet).
Keep Dexpan® in DRY storage. Seal box / bag after use. Keep out of reach of children and pets.